Specification

• 14 gauge type 304 stainless steel construction.
• Welded seamless construction with no gaps, cracks or crevices.
• Flushing jet is located at the front interior of the toilet bowl
• Waste tube is 2-3/8" OD stainless steel located in back of the toilet bowl's interior capable of passing a 2-1/8" diameter ball.
• Water surface area in the bowl maintains traditional 10" X 12"
• Reseal reservoir assures positive trap reseal.
• Rimless washdown provides superior washdown of the bowl interior.
• Toilet bowl requires a minimum 1" (25 mm) supply able to sustain pressure of 25 psi (172 kPa) while flushing.
• Meets low consumption (1.6 gpf) toilet requirements per ASME 112.19.2M and CSA B45.05-94.